Scan Body on Ti Base

Our scan bodies work on 27 different dental implant connections. These are compatible with most of the DESS Straight and ANGLEBase^® Ti Bases.

These scan bodies will slide over most straight or ANGLEBase^® ti bases.

53.200 STL		53.100 STL		53.107 STL
For Engaging Ti Base or ANGLEBase® Ti Base (SKU 15.007 and SKU 36.007) Available in PEEK (SKU 53.200-P10 Packs of 10)		For Non-Engaging Ti Base or ANGLEBase® Ti Base Available in PEEK (SKU 53.100-P10 Packs of 10)		For Multiunit Ti Base or ANGLEBase® Ti Base Not currently available in PEEK
This Scan Body has a flat side on the outside and a flat side internally.		This Scan Body is cylindrical outside and internally.		This Scan Body is cylindrical outside and internally.
Download STL File		Download STL File		Download STL File
Engaging Scan Body 50.600 or 53.200.stl		Non Engaging Scan Body 50.500 or 53.100.stl		53107_multiunit.stl

Whichever ti base you use with this scan body is the same ti base you will select in either the 3shape^®, exocad^®, or Dental Wings^® libraries. 

PEEK scan bodies are autoclavable and reusable.

Library File Naming Conventions

The naming conventions within your library file may vary. For engaging you will select either 50.600 or 53.200 and for non-engaging you will select either 50.500 or 53.100.

For 3Shape^® the library names will be:

50.600 or 53100_scanTibase_x.x (x.x is the version number so for example 2.0) – for the engaging scan body

50.500 or 53200_scanTibase_x.x (x.x is the version number so for example 2.0) – for the non engaging scan body

For exocad^® the library names will be:

“Scan Abutment on Ti Base”

For Multiunit the library name is "DESS Multi TiBase - Scan Abutment on Ti Base"

In this example, a Nobel Active^® ti base was used:

After choosing the library, select the specific platform and the ti base that is being used. In this example, a RP - 1.2mm straight ti base was selected with the option of selecting either engaging or non-engaging:

Additional STL File Options

The following Scan Body on Ti Base's are available as STL files:

53.248 STL	53.148 STL
For Straumann Tissue Level WN on implant engaging (straight ti base and ANGLEBase®) use scan body on ti base	For Straumann Tissue Level WN on implant non-engaging (straight ti base and ANGLEBase®) use scan body on ti base
Download STL File	Download STL File
53248_ScanTiBase.stl	53148_ScanTiBase.stl
53.210 STL	53.110 STL
For Straumann Tissue level RN on abutment engaging (straight ti base only), Branemark WP and BioHorizons External Hex Engaging (for straight and ANGLEBase®) use scan body on ti base	For Straumann Tissue level RN on abutment non-engaging (straight ti base only), Branemark WP and BioHorizons External Hex non engaging (for straight and ANGLEBase®) use scan body on ti base
Download STL File	Download STL File
53210_ScanTiBase.stl	53110_ScanTiBase.stl

Current DESS Library Files

On the DESS Library File page, you will find the most current library files, a library file guide, and library file installation instructions.

What Implant Systems and Situations will these Scan Bodies Work With?

If you wish to design custom titanium or custom chrome cobalt abutments using the DESS premill's then you will have to use either the desktop or intraoral scan body.

The following systems DO NOT have a "scan body on ti base" solution:

• On top of Astra Osseospeed^® uniabutment (for 20° uniabutment use desktop scan body SKU 50.036 or intraoral scan body SKU 52.036) (for 45° uniabutment use desktop scan body SKU 50.037 or intraoral scan body SKU 52.037)
• On top of Astra EV^® uniabutment (use desktop scan body SKU 50.058 or intraoral scan body SKU 52.058)
• On top of Straumann^® SRA abutment (use desktop scan body SKU 50.098 or intraoral scan body SKU 52.098)
• On top of MIS^® Multiunits from MIS^® only (not DESS MUA’s for MIS Seven) use intraoral scan body SKU 52.085